Wednesday, March 22, 2017

Sunday Session and EMCOMM = Interesting





 As scheduled, there will be a “Sunday Session” this coming Sunday, March 26th at 12 noon. Anyone interested in ham radio is invited to attend and participating hams are encouraged to bring their latest projects, problems, comments and questions and of course….coffee.  See you there. Any questions on the Sunday Sessions? Drop me an email at res@gwi.net.

Wednesday, March 15, 2017

KA1DBE's Satellite Comms Demo


On Thursday March 9th the Ellsworth Amateur Wireless Association (EAWA) held it’s monthly meeting. After the business meeting, member Jeff Hanscom KA1DBE, gave a great presentation on Amateur Radio Satellite Communications. A lot of info was passed on and a lot of interest was shown. Look for lots of radio reports coming from Grid FN54!




Monday, March 6, 2017

Field Day 2017...It's Sneaking Up!

The following is a classic article from eHam on Field Day operations and planning. FD 2017 is approaching fast, time to start thinking about it EAWA members!
 
 

Top of Form

 

Bottom of Form

How to Come Back After Field Day by KA7EKW)  
Well, it's that time again. Those little flakes of "global warming" have stopped falling, the snow shovel is hanging in the garage, and a ham's thoughts turn to Field Day.
However, you will be facing risks this year that you never have faced before. It doesn't matter how many contacts you make, if you are the highest-ranking Silent Key in the list!
The risks break down into three areas: Technology, Environment, and Medical.
Let's deal with Technology first.
Oh, sure, you've done this every year, so long that you still have a couple of Motorola plugs in your tool kit, but unless you are running a solo effort, there is a good chance that someone you've never met is bringing out equipment that you've never seen. Look from a distance, until you know the ways that it might bite you.
If you're in a club, it's a good idea to appoint a safety officer -- an experienced ham who likes to build things -- to check all installations during and after setup. His or her ONLY job is to look for things that don't look right. No power is applied until cleared with Safety.
Are the power leads properly insulated, the antenna properly grounded, the generator safely away from hazards -- and not aimed to fill your tent with carbon monoxide while you sleep?
Antennas deserve special attention -- they tend to be sharp at one end, hard to see at night, and can zap you anywhere along the length. Are you running an NVIS (aka "Radiating Neck-Wire") . . ? It's a good idea to drape something like barrier tape at invervals, so that it's obvious there's something there. A tower? Imagine the worst-case scenario, and it falls over -- where will it go? Onto a power line, or someone's sleeping bag?
Everything needs to be labeled, unless nobody other than the builder will operate it. ALL power leads must be marked, in case you need to cut off the juice in a hurry.
Field Day is supposed to be a disaster DRILL, let's not make it REAL.
Second, we have Environmental.
Some of this might be related to Technology, like the guys I watched raising a tower during a lull between thunderstorm cells passing overhead, or the guy who drove his ground rod through the school sprinkler system.
However, the environment is other things. Do you have a security issue, where equipment is likely to disappear if left unattended? Or maybe most of your planned area has recently been sprayed with bug killer. Or a new power line has been run . . .there are a lot of factors.
Don't be afraid to find somewhere else to operate -- that's a big part of working a field expedient site, learning where not to put them. Even just picking the opposite corner of the park may make all the difference between a safe weekend and a real problem.
Lastly, we have Medical.
Sorry, OM, but you ARE an OM! That tower trailer that you eagerly cranked a couple of years ago (well, let's be honest, TWENTY years ago) is ready to be your first heart attack. If you're the only one around to crank it, take it easy, take your time on the crank.
Unless you are Jack LaLanne (I think that guy is allergic to Kryptonite!), as you get older, you are no long able to jump into the same level of effort that you used to. If nothing else, this is your incentive for recruiting some teenagers into ham radio!
You also need to think things through. Make sure that you know what you are doing, and that you're at that step in the process (especially important if working as a team). If in doubt, start over rather than miss an important step.
Setup isn't the only worry. Make sure you get enough water (plain old water, or club soda). By the time you notice that you're thirsty, you are already dehydrated, so maybe a big club should assign someone to keeping the flow of water going to every operator. And, if you're there in the tent, if anyone takes a drink, EVERYONE take a drink. Don't skip meals, and don't load up on snacks and junk.
If you are out in the sun, WEAR YOUR HAT. Use sunscreen. Wear loose-fitting long sleeves.
Don't forget your flashlight and batteries. Wandering around at night is a really good way to learn WHY we call NVIS antenna "Radiating Neck Wires," or be reminded exactly where the counterpoise was staked.
Now, since it seems that most clubs go hide out on mountaintops for FD, you also need to make sure that you bring extra water, food, fuel and meds -- be prepared to be stuck out there for 5 days.
Lastly, be prepared to evacuate the site. Make a checklist of the most important stuff to load first -- you may have less than 5 minutes' warning if a fire starts. Nothing that you own is worth dying for, and if you're given an evacuation order, GO. The best plan is to leave everything in your car unless you are using it.
Practicing this part can be fun. I've seen a couple of clubs that made it a contest to be ready to roll after FD is over.
Whatever you do, wherever you go, just do your best to be back home Sunday night, and back for next year's Field Day.

 

Well, 'dah dit dah".


Recently in the Down East Maine area there has been a increasing interest in learning CW…otherwise known as Morse Code. With a weekly CW net for training led by Phil N1EP down in Milbridge using the 146.910 KB1NEB repeater here in Ellsworth, a few hearty souls have jumped aboard the sessions and some have been snagging a few actual QSOs on air. Join in on the nets on Tuesday nights at 1830 hrs (6:30 PM) and have fun.
Just think, Norm N1NGM (SK) is up there smiling down upon us and most likely muttering; “What took them so long!?”
_ _ …  …_ _

EAWA MEETING!


 

REMINDER: This coming Thursday, March 9th, the Ellsworth Amateur Wireless Association (EAWA) will be holding their monthly meeting. It will be held at the usual spot, Meadow View Apartments Phase 4 Community Room, 25 Tweedie Lane, Ellsworth at 6 PM. This month Jeff Hanscom KA1DBE will be giving a presentation on communicating through the Amateur Radio satellites. The meetings are open to all licensed Amateur Radio Operators AND anyone interested in Ham radio and wants to learn more about it! Make it a point to attend! For further info contact me via FB messaging or email me at w1krp@arrl.net. Share on FB to spread the word about this great hobby!
 
73 de W1KRP

Wednesday, January 25, 2017

Sunday Sessions


Last Sunday, January 22, EAWA held it’s first of hopefully many “Sunday Sessions” where Hams meet and work on their  projects, get help or just socialize! 12 of us met and got things accomplished, on personal projects and also we were able to get the Diamond dual band antenna back up on the roof after it was knocked down during a storm months ago. Thanks go out to Mark Albee N1MEA and Chris Weaver AB1PZ for taking it down and making repairs. Chris AB1PZ and Chris N1CJS took the time and got everything back as it should be! Phil N1EP worked on a QRP rig he Is hoping to get on the air soon. Next session will be on Sunday February 26th at noon time at Meadow View Apartments Phase 4 Community Room, 25 Tweedie Lane in Ellsworth.

Photo by Jeff KA1DBE

Photo by Jeff KA1DBE

Photo by Jeff KA1DBE

Photo by Dick W1KRP

Photo by Dick W1KRP
 

EAWA


Image result for ham radio
EAWA, Ellsworth Amateur Wireless Association, next meeting will be Thursday, February 9th at 6 PM. Meetings are held in the Meadow View Apartments Phase 4 Community Room located at 25 Tweedie Lane in Ellsworth. We are open to any licensed Ham or ANYONE interested in this great hobby! At our February meeting,  Jeff Hanscom, KA1DBE, will do a presentation on Amateur Radio satellite communications. Jeff has moved back to Maine from Virginia and brings a wealth of info and enthusiasm to share. Just before moving back here, Jeff was a member of the Virginia Beach Amateur Radio Club and was awarded their 2016 Ham of The Year award. In March, member Rob Collins W8HAP will do a antenna presentation which should be very informative! Whatever Rob does…he does it right. So, plan on attending the meetings and if you are just lurking out there wondering what this Ham Radio stuff is all about, stop on by and see what’s up! For further information about Amateur Radio or EAWA please feel free to contact: President Chris Stanley N1CJS at n1cjs@arrl.net, V.P. Dick Small W1KRP at res@gwi.net or Secretary/Treasurer Evie Sargent KA1BRA at eviesargent@yahoo.com . General information on Ham radio can be found at www.arrl.org.